Elevate your business
Learn about the 15 costs
you need to manage and
master, for a successful
meat processing business.
GET YOUR FREE
The AIRMASTER® UKQ AIRJET is the world’s best performing cross-flow universal unit. It has been developed specifically for lying products and is completely multi functional. Production capacities far above the normal levels can be achieved with its extremely high power reserves.
The new AIRMASTER UKQ AIRJET with horizontal air-flow guarantees with the perfect horizontal cross-flow air circulation system for uniform drying and smoking of the products, even at the less distance between the levels (up to 26 levels) and also at the densely loaded smoking trolley. The entire treatment process for drying and smoking of salmon depends on the fabric and pre-treatment takes between 4-8 hours. This represents a significant shortening of the processing times at the same time significantly higher loading of the chamber.
Nowadays, a purchase decision is made based on the legal environmental constraints and is reasonably dependent on the practical solution in term of smoke generation and smoke removal. Here we offer with our environmental friendly CircoSystem a total solution approach, which does not only convince the inspection official but also convince the plant operator.
The AIRMASTER® UKQ AIRJET is the world’s best performing cross-flow universal unit. It has been developed specifically for lying products and is completely multifunctional. Production capacities far above the normal levels can be achieved with its extremely high power reserves.
Air Circulation – Air transfer is 6000³/hr per chamber. Vertical air flow system is best suited for hanging products.
Pneumatic Valves: This enables the unit to run fully automatically with complete control at all times.
Heating System (in Electric units): The heating system is made by incorporated heating elements which are installed in the top part of the chamber. (28 KW per chamber)
Steam Generation (in electric units): Steam is generated by water spray over heating elements and is controlled through electromagnetic vales via the main control panel.
Control Board: with all operating elements installed at the lateral side of the door beside the unit. The switches, computer and control lamps are easy accessible for the operator.
Unicontrol 3000 TS –Touch screen computer is available for selecting time, temperature, humidity and core temperature in separate steps for reddening, drying, smoking, cooking, showering, cooling etc. The pre-programmed programs are called up by pressing the program number assigned to each program. The programmed data is shown on one side of the computer and the actual data on the other side so a clear view of the running program can be followed at all times. When starting or while running a program the data given can be changed or stopped at any time, the pre-programmed data does not change. 99 programs can be stored for easy call up of each program.
The latest touch screen model allows clear and easy programming of new programs and adjustments to existing ones. This control gives clearer understanding of the operating process.
Core Temperature: is incorporated inside the unit. Here is a core probe feeler which will be put into the meat to be measured.
A system with controllable relative humidity is installed so the air inside the chamber can be moistened in every working cycle.
Comfort cleaning system: The computer includes a special program for the automatic cleaning of the unit including the Smoke Generator, head space and all pipe work.
Smoke Generation – Maxx Smoker G 505 H
Scope: Hot, warm and cold smoking
Smoking material: Chip shavings (granule size 4 – 12 mm)
Functioning: The MaxxSmoker G 505 H is a fully automatic smoke generator for smouldering Beechwood chip shavings. The smoke generator works continuously and reliably with a shavings feeding unit with a geared motor, the targeted addition of the carbonized air by means of a special high-pressure blower (side-channel compressor).
A very aromatic smoke results while smouldering due to the design characteristics of the smoke generator, which draws the fresh smoke through still unburned smoking material. All aroma-forming smoke components can thus develop. Due to a special ignition process, the required smoke is available very shortly after starting the smoke generator (approx. one minute). Thus no pre-ignition is necessary before beginning the smoking step. Three different smoke densities for various smoking applications can be entered at the control.
The MaxxSmoker G 505 H works on the exhaust air reduced system with throttled fresh-air supply. This means that the smoking process only emits as much exhaust air to the chimney as fresh air is required for the smouldering. This permits economical smoking with minimal environmental burden.